About Remanufactured printer cartridge:

Remanufactured or recycled printer cartridges are the best way way to save your profits. Weather toner or ink, the recycled cartridge give you attractive and quality printouts and potentially protect environment.

Remanufactured ink cartridges are less expensive and better for the environment than new cartridges. Switching to remanufactured cartridges can result in a cost savings of between 15 and 50 percent per order. In the process of Recycled printer cartridges it is restocked with ink and replaced or repaired any parts that are damaged or not working correctly. Once the cartridge is set in its original form a quality test is performed on each cartridge to look up for any problems. People concerned with the environment, remanufactured ink cartridges preserve a natural resources keeping unnecessary metals and plastics away from the site. Remanufactured cartridges usually use the shells of old cartridge and then are refilled with new tomer or ink thus getting the original performance of the printer with lower cost.

Why one should opt for recycled cartridge.

  1. 42000 tons of plastics and metals are kept at bay by using recycled cartridge.
  2. Five to six pounds of hazardous raw materials are used for one pound of toner. With remanufacturing toners this can be reduced down by 50 to 60 %.
  3. Materials used in the cartridge usually are not decomposable, it requires ten centuries to do so which is not feasible for today’s condition. It is eliminated to certain extent if organisations opt for recycled cartridge.

We at BKS Enterprises always look for ways to that will help reduce cost as well as environmental burden. This will not only help to protect nature but also help organisation to help them save on their profits. We are proud to be a company that helps customers recycle, rather than discard their printer cartridges.

With corporate responsibility, it is a wise step or you can call a small step towards society and yourself if you opt for such environmental protection programs.

The Process:

The process involved is different with toner and inkjet cartridge. With toner cartridge and inkjet cartridge, here we present a simple process that we carry out. By using technology to manufacture and testing processes, we provide inkjet and toner cartridges that are more affordable, eco-friendly and deliver top-quality printing.

Remanufacturing of Toner Cartridge:

  1. Disassemble the cartridge completely.
  2. Clean and thoroughly inspect every part for damage parts of the cartridge.
  3. Replace carefully with great inspection the damaged or worn parts of the cartridge.Any parts that are not suitable for further printing are passed on to either waste plastic recyclers. Toner cartridge do not contain much hazardous materials and therefore remanufacturing of the same does not include any hazardous materials.
  4. Fill the cartridge with type and amount of toner specified for the printer.
  5. Assemble the cartridge completely.
  6. Test the cartridge in a printer to ensure performance and quality standards of the same.
  7. Package the cartridge and deliver to the doorstep of the organisation.

Remanufacturing of Ink Cartridge:

  1. Check the electrical circuitry of the printer.
  2. Clean the printhead.
  3. Fill the cartridge with the type and amount of ink specified for the printer.
  4. Test the cartridge in a printer to ensure performance and quality standards.
  5. Package the cartridge and deliver to the doorstep of the organisation.

Refilling process:

There are two ways to refurbish a printer cartridge. A cartridge can be simply refilled or remanufactured. Understanding these differences will help you make the right choice when buying aftermarket printer cartridges.

A cartridge is either refilled or manufactured. Here we tell the process to refill a cartridge:

  1. Firstly the waste bin of the cartridge is drilled and the remains are emptied, later a patch is applied to cover the hole.
  2. The hopper of the cartridge is drilled, then emptied of the old toner, thus replacing with generic new toner.
  3. The last stage is to pack Cartridge and deliver the same.  

Since this is remanufactured or refilled, it may take time to thoroughly inspect and get it done in correct way. It may take around 30 minutes to 1 hour to perform depending on the type of the cartridge. The outcome will be very satisfying since complex parts are cleaned and replaced when necessary.

CONTACT US